PMS JRSC ITR Tuning help

[vactor]

no map mod for me, BUT: i was wondering if anyone using a PMS has some settings to send me so i can get in the ballpark for tuning my JRSC ITR ... i will be using 265cc injectors, stock boost, kami header and an intake. i only have the handheld controller, so if someone has at least some timing settings, if not similar fuel settings to get me close at 2000, 4000 6000 and 7800 rpm, i would be MOST grateful. [img]smile.gif[/img]

ps
i am also using an Ultrasafeguard v1.

<font color="#a62a2a" size="1">[ September 20, 2002 08:14 PM: Message edited by: vactor ]</font>

[BlownSOL]

Dont know if this helps, but I have 440cc with the interaq software. If you want the settings, I will take a look, just email me.

al

[vactor]

hi blownsol. i cannot seem to private message you or see your email. if you could look for the settings, i would REALLY appreciate it. you can email me at [email protected]

p.s. my brother graduated from clemson. it is SO nice down there!! [img]smile.gif[/img]

[JRCivic]

265cc injectors are nowhere near large enough to provide enough fuel for the system to work without a rising-rate regulator.

You need to purchase a set of 440's... or bigger... and then someone can get you a map that will put you in the ballpark.